DPER=0, DCMF=0, DFER=0, DCME=0, IDSEL=0
Data Compare Match Control Register
| DCMF | Data Compare Match Flag 0 (0): No matched 1 (1): Matched |
| Reserved | These bits are read as 00. The write value should be 00. |
| DPER | Data Compare Match Parity Error Flag 0 (0): No parity error occurred 1 (1): A parity error has occurred |
| DFER | Data Compare Match Framing Error Flag 0 (0): No framing error occurred 1 (1): A framing error has occurred |
| Reserved | This bit is read as 0. The write value should be 0. |
| IDSEL | ID frame select Bit (Valid only in asynchronous mode(including multi-processor) 0 (0): It’s always compared data in spite of the value of the MPB bit. 1 (1): It’s compared data when the MPB bit is 1 ( ID frame ) only. |
| DCME | Data Compare Match Enable (Valid only in asynchronous mode(including multi-processor) 0 (0): Address match function is disabled. 1 (1): Address match function is enabled |